Complete High Volume Fluid Milk Jug Plant
Online Auction
-
Description
Opa Locka, FL – (10) Milk Silos 6,000 to 25,000 Gal, (2) Plate and Frame HTST Systems, Federal Fillers, Separators, Homogenizers, Processors, Liquifiers, Uniloy Blow Molders, Resin Silo, Bagging, CIP, COP, Jug Sleevers, Casing Equipment, PD & Centrifugal Pumps, Valves, Fittings, Lab, Forklifts, and Plant Support.
Location address:3000 NW 123rd St Miami (Opa-Locka), FL 33167
Brochure, Lot Catalog, Equipment List Downloads
There are currently no documents available.
Currency: USD
Sale Start Date: Thursday, January 3, 2019
Sale Start Time: 11:00am (EDT)
Sale End Date: Thursday, January 10, 2019
Sale End Time: 11:00am (EDT)
Buyers Premium:
18% Buyers Premium Applies to All Sales and Local Sales Tax Without Exemption Form buyers premium applies to all purchases.
Lot Numbers: 1-235
Sales Tax:
7% (Miami-Dade County)
-
Featured Items
- Mueller 25,000 Gallon Stainless Steel Silo, Approx 12′-6″ Diameter, Ammonia Refrigerated, Horizontal Agitation, Two (2) Air Valves, Mueller Chart Recorder, Level Control Sensor, Sani-Flow Thermometer, Raw Milk Silo
- Mueller 25,000 Gallon Stainless Steel Silo, Approx 12′-6″ Diameter, Ammonia Refrigerated, Horizontal Agitation, One (1) Air Valves, Muller Chart Recorder, Level Control Sensor, Sani-Flow Thermometer, Raw Milk Silo
- Mueller 25,000 Gallon Stainless Steel Silo, Approx 12′-4″ Diameter, Ammonia Refrigerated, Horizontal Agitation, One (1) Air Valves, Muller Chart Recorder, Level Control Sensor, Sani-Flow Thermometer, Buttermilk Silo
- Cherry Burrell 25,000 Gallon Stainless Steel Silo, Approx 12′-8″ Diameter, Level Control Sensor, Ammonia Refrigerated, Buttermilk Silo
- Mueller 25,000 Gallon Stainless Steel Silo, Approx 10′-8″ Diameter, Ammonia Refrigerated, Horizontal Agitation, Chart Recorder, Level Control Sensor, Sani-Flow Thermometer, Pasteurized Silo, S/N: 118691-2
- Mueller 15,000 Gallon Stainless Steel Silo, Approx 10′-10″ Diameter, Ammonia Refrigerated, Horizontal Agitation, Chart Recorder, Level Control Sensor, Sani-Flow Thermometer, Pasteurized Silo
- Mueller 15,000 Gallon Stainless Steel Silo, Approx 10′-10″ Diameter, Ammonia Refrigerated, Pasteurized Silo, S/N: 118691-3
- Mueller 15,000 Gallon Stainless Steel Silo, Approx 10′-10″ Diameter, Ammonia Refrigerated, Pasteurized Silo, S/N: 118691-5
- Cherry Burrell 15,000 Gallon Stainless Steel Silo, Approx 10′-8″ Diameter, Horizontal Agitation, Level Control Sensor, Chart Recorder, Two (2) Air Valves, Ammonia Refrigerated, Buttermilk Silo, S/N: 15-70-261
- Mueller 6,000 Gallon Stainless Steel Silo, Approx 9ft-0in Dia, Vertical Agitation, Refrigerated, Level Control, Chart Recorder, Thermometer
- Peabody TecTank 5110 CuFt Aluminum Resin Silo, Approx 10 ft Dia, Approx 54 ft Tall, Ladder, S/N: 31898
- Smith Epoxy Lined Sugar Tank, w/sugar pump, UV Light
- Smith Epoxy Lined Sugar Tank, w/sugar pump, UV Light
- Stainless Steel Balance Tank, Approx 30in x 40in x 16in Deep
- Stainless Steel Balance Tank, Approx 30in x 40in x 16in Deep
- 100 Gallon Stainless Steel Vertical, Spray Ball, Level Probe, Cover
- Single Shell Stainless Steel 500 Gallon Tank, Dome Top
- Uniloy 350R2 Blow Molder w/ Siemens VFD, Located in O’Fallon, IL
- Uniloy Model 350R2 Blow Molder, 4-Head 1 Gallon Jug, Cooling Bed and Trimmer, w/ Molds, Dyco Annealing Tunnel, S/N: 350R23277
- Uniloy Model 350R1 Blow Molder, 5-Head 1/2 Gallon Jug, Cooling Bed and Trimmer, No Molds, Dyco Annealing Tunnel, Siemens VFD, S/N: 350R1-2441
- LR Systems Regrind with Blend Hopper
- Federal 26 Valve Filler with 8 Head Capper, Setup for Gallon Jugs, Model 1437GW268R837, Missing Cap Hopper
- Federal 26 Valve Filler with 8 Head Capper, Model 1649GW6/268L636, Missing Cap Gear and Capper, Left Hand Machine
- Federal 18-Valve Filler, Set Up for 1/2 Gallon Jugs, Right Hand Machine, Missing Cap Feeder and Capper
- Federal 26-Head Filler, Model 14166WX6/2656L571 (Parts Machine)
- Mueller 2,000 Gallon Processor, Dome Top, Steam Jacket, Agitation, Spray Ball, Tri-Clover Air Valves, Chart Recorder, 3″ Outlet, Level Control Sensor, Temp Sensors
- Gaulin Model 5000MC452TPS Homogenizer (Parts Machine)
- APV Gaulin Model G90-3P Stainless Steel Clad Homogenizer, 3000 PSI Poppet Valve Cylinder, 125 HP, Max Capacity, 3700 GPH, S/N: 19992410323
- Alfa Laval Model MRPX-214 700 Separator, Warm Milk or Whey, 28,500 Lbs/Hr Separation, 40,000 Lbs/hr Standardizing, S/N: 2893694
- Breddo Model LOR Liquifier, 200 Gallon, 60/30 HP, S/N: D19572-1 98290
- Liquifier, Approx 200 Gallon, Missing Motor
- APV Model SR-2508 Cream Press, Stainless Steel, S/N: 18530
- Breddo Model 1BT Liquifier, 25 HP, 200 Gallon, S/N: D-67136 4 92303
- Walker Model PZ-ST 500 Gallon Processor, 25-01-Processor-3A, Dome Top, 75 PSI Jacket at 250 Deg F, S/N: 3791
- (3) Tank CIP System w/ (2) Stainless Steel Heat Exchangers, Shell & Tube, (10) Air Valves, Control Panel, (1) Centrifugal Pump
- (3) Tank CIP System w/ (1) Stainless Steel Heat Exchangers, Shell & Tube, (6) Tri-Clover Air Valves, No Control Panel, (1) Stainless Steel Centrifugal Pump
- (3) CIP Manifolds, Approx 850 ft Stainless Steel Pipe in Filler Room, 2.5in, 2in, 3in, (1) 2 in. Check Valve, (3) 3 in Plug Valves
- Stainless Steel COP Tank, Approx 24in x 74in x 21in Deep
- Stainless Steel COP Tank, Approx 24in x 82in x 21in Deep
- Stainless Steel COP Tank, Approx 20in W x 74in L x 18in Deep, w/ 10 HP Stainless Steel Centrifugal Pump
- Fristam Centrifugal Pump, 3 HP, 2in Inlet, 1.5in Outlet, Model: FPX721003854
- Stainless Stee Centrifugal Pump, 5 HP, 3in Inlet, 1-1/2in Outlet
- Stainless Steel Centrifugal Pump, 3HP, 3in Inlet, 1.5in Outlet
- Stainless Steel Centrifugal Pump, 3HP, 3in Inlet, 1.5in Outlet
- Stainless Steel Centrifugal Pump, 3HP, 3in Inlet, 1.5in Outlet
- Stainless Steel Centrifugal Pump, 3HP, 3in Inlet, 1.5in Outlet
- (4) Stainless Steel Centrifugal Pumps, 5 HP, 3in Inlet, 1.5in Outlet, (2) pumps are missing parts, (2) pumps are complete
- (1) Stainless Steel Centrifugal Pump, 7.5 HP, 2.5in Inlet, 1.5in Outlet
- (1) Stainless Steel Centrifugal Pump, 3 HP, 2.5in Inlet, 1.5in Outlet
- Stainless Steel Centrifugal Pump, 3 HP
- (3) Stainless Steel Centrifugal Pumps, (3) Check Valves, Stainless Steel piping (Approx 500 ft) in Receiving Bay
- Alfa Laval Centrifugal Pump, 15 HP, Stainless Steel Motor, 2.5in Inlet, 2in Outlet, Model: 9634089848, S/N: 848102
- Fristam Centrifugal Pump, 5 HP, 3in Inlet, 2.5in Outlet, Model: FPX3551220, S/N: 355169697
- Fristam Centrifugal Pump, 5 HP, 3in Inlet, 2.5in Outlet
- Fristam Centrifugal Pump, 5 HP, 3in Inlet, 2.5in Outlet
- G&H Stainless Steel Centrifugal Pump, 2.5in Inlet, 2in Outlet
- Fristam Centrifugal Pump, 5 HP, 3in Inlet, 2.5in Outlet, Model: FPX3551 140, S/N: 353167120
- Fristam Centrifugal Pump, 5 HP, 3in Inlet, 2.5in Outlet, Model: FPX3541205, S/N: 354172542
- Fristam Centrifugal Pump, 5 HP, 3in Inlet, 2.5in Outlet, Model: FPX3541105, S/N: 354174270
- Fristam Centrifugal Pump, 7.5 HP, 2.5in Inlet, 2in Outlet, Model: FPX3551-240, S/N: 355170254
- G&H Centrifugal Pump, 10 HP, 2.5in Inlet, 2″ Outlet, Model: GHH-20, S/N: 95-9-52320
- Fristam Centrifugal Pump, 5 HP, 3in Inlet, 2.5in Outlet
- Fristam Centrifugal Pump, 5 HP, 3in Inlet, 2.5in Outlet, Model: FPX3541205, S/N: 354165041
- Fristam Centrifugal Pump, 7.5 HP, 3in Inlet, 2in Outlet, Model: FPX3451-250, S/N: FPX345199657
- G&H Positive Displacement Pump, 5 HP, 2.5in Inlet, 2.5in Outlet, Model: GHPD-622, S/N: 99-7-8573A
- Waukesha Model 60 Positive Displacement Pump, 5 HP, 2in Inlet, 2in Outlet, S/N: 275692 02
- Fristam Positive Displacement Pump, 3 HP, 1in Inlet, 1in Outlet, Model: FRL25A, S/N: FRL25A1207093
- G&H Positive Displacement Pump, 7.5 HP, Stainless Steel Motor, 4in Inlet, 4in Outlet, Model GHPD 732V, S/N: 99-7-5492A
- Kontro Sine Pump, 5 HP, 3in Inlet, 3in Outlet, Model SPS030NNTC, S/N: 208347030C74
- Fristam Centrifugl Pump, 10 HP, Stainless Steel Motor, 2.5in Inlet, 2in Outlet, Model: FPX3532-155, S/N: FPX3532991026
- G&H Centrifugal Pump, 7.5 HP, 3in Inlet, 2in Outlet, Model: GHH-20, S/N: 97-8-53888
- Fristam Centrifugal Pump, 7.5 HP, 3in inlet, 2.5 in Outlet, Model: FPX 3451-250, S/N: FPX 354100924
- Alfa Laval Positive Displacement Pump, 10 HP, 3in Inlet, 3in Outlet, Model: 5R05/168/LS, S/N: 144816
- (2) FMI Labs Vitamin Pumps, w/ Stainless Steel Cabinet
- Fristam Centrifigual Pump, 10 HP, 2.5in Inlet, 2in Outlet, Stainless Steel Motor, Model FPX3532-170, S/N: FPX35321502944
- Fristam Centrifigual Pump, 10 HP, 2.5in Inlet, 2in Outlet, Stainless Steel Motor, Model FPX3532-170, S/N: FPX35321502943
- Fristam Centrifigual Pump, 10 HP, 2.5in Inlet, 2in Outlet, Stainless Steel Motor, Model FPX3532-170, S/N: FPX35321502945
- Fristam Centrifigual Pump, 10 HP, 2.5in Inlet, 2in Outlet, Stainless Steel Motor, Model FPX3532-170, S/N: FPX35321502942
- Fristam Centrifugal Pump
- Fristam Centrifugal Pump, 10 HP, 2.5in Inlet, 2in Outlet
- Fristam Centrifugal Pump, 10 HP, 3in Inlet, 2.5in Outlet
- G&H Model GHH-20 Centrifugal Pump, 5 HP, 2.5in Inlet, 2in Outlet, S/N: 99-6-56100
- G&H Model GHH-20 Centrifugal Pump, 5 HP, 2.5in Inlet, 2in Outlet, S/N: 98-10-55124
- Fristam Centrifugal Pump, 7.5 HP, 2in Inlet, 2in Outlet, Stainless Steel Motor, Model: FPX3532-170, S/N: FPX35321502946
- G&H Model GHH-10 Centrifugal Pump, 7.5 HP, 2.5in Inlet, 2in Outlet, S/N: 98-3-52650
- G&H Model GHPD-532 Positive Displacement Pump, 5 HP, 2.5in Inlet, 2.5in Outlet, S/N: 97-7-7523A
- G&H Positive Displacement Pump, 7.5 HP, 3in Inlet, 3in Outlet, Model: SX5WLD-30MDE4108E, S/N: 04-10-11336
- Positive Displacement Pump, 10 HP, 3in Inlet, 3in Outlet
- Alfa Laval Centrifugal Pump, 15 HP, Stainless Steel Motor, 2.5in Inlet, 2in Outlet, Model: 9634089848, S/N: 848100
- Uniloy Model 350R2 Blow Molder, 4-Head 1 Gallon Jug, Cooling Bed and Trimmer, w/ Molds, Dyco Annealing Tunnel, Rockwell VFD, S/N: 350R23262
- APV Model R51 Plate Heat Excahagner, S/N: 27536
- APV Model R51 Plate Heat Excahagner, S/N: 4324
- (2) HTST Heat Exchangers, Shell & Tube w/ (2) Pumps on Stand
- 3in Holding Tube, Approx 100 ft.
- 3in Holding Tube, Approx 100 ft.
- Stainless Steel Check Valve, 2.5in
- Stainless Steel Piping in Blender Room, Stainless Steel Filter only, (2) Tri-Clover Air Valves (2in), (1) Flow Meter, Approx 150 ft Stainless Steel Piping
- (2) 2.5in Tri-Clover Air Valves
- (2) 2.5in Tri-Clover Air Valves
- (3) 2.5in Tri-Clover Air Valves
- (1) 2.5in Tri-Clover 2-Way Air Valve
- (11) Stainless Steel Tri-Clover 2.5 in Air Valve Cluster
- (3) Stainless Steel Tri-Clover 2.5 in Air Valve Cluster
- (3) Stainless Steel Tri-Clover 2 in Air Valve Cluster
- SS Piping (Approx 1500 ft), (75) Tri-Clover Pipe Clamps, (4) 3in Plug Valves, (2) Flow Direct Panels, in raw silo and HTST room
- (1) 2.5in Check Valve, (1) 2in Check Valve
- 2-Way Tri-Clove Stainless Steel Air Valve, 2.5in
- (3) Definox Air Valve Cluster, 2.5in
- (5) Tri-Clover Air Valve, 2in
- Approx 150 ft – 4in Transfer Hose (2)
- Stainless Steel Filter, 3in Inlet & Outlet
- (2) Stainless Steel Inline 3in Filters
- Stainless Steel Conveyor w/ 3.25in Belt, (1) 180 deg, (3) 45 deg, (1) 90 deg turns, Appox 65 ft
- Stainless Steel Conveyor w/ 3.25in Belt, (1) 180 deg, (2) 45 deg, (2) 90 deg turns, Appox 53 ft
- Stainless Steel Conveyor w/ 3.25in Belt, (2) 45 deg Turns, Approx 25 ft.
- Above Ground Case Conveyor w/ 180 Deg Turn, Approx 45 ft
- Cannon UST70711-B Overhead Case Positioner w/ Trash Shoot, S/N: 692
- Stainless Steel Overhead Pan Case Conveyor, Approx 100 ft w/ (4) 90 deg Turns, (3) Cannon Case Inverters
- Stainless Steel Above Ground Case Conveyor, Approx 160 ft, (5) 90-Deg Turns, (4) 45-Deg Turns, (5) Electric Drives, w/ Hydraulic Case Stopper
- Stainless Steel Conveyor, Approx 100 ft with (4) Drives
- Aluminum 1 Gallon Jug Conveyor, Approx 800 ft +, w/ (2) Incline Conveyors
- Aluminum 1/2 Gallon Jug Conveyor, Approx 600 ft +, w/ (2) Incline Conveyors
- Dyco 210DUO Bagging Table, S/N: 20-612-0993
- Girton Model GC50 Single Line Case Washer, Approx 5ft Long Case Dryer, Approx 16ft Overall Length, S/N: 98080601
- Enercon SuperSeal DX 4-Head Foil Cap Sealer, Model Numbers: LM4466-03 / LLM4466-01 / LM5009-12 / LM466-02, S/N: C19261-01
- Cleaver Brooks Model CB700-100 Package Boiler, Natural Gas, 150 PSI, S/N: L-92248
- Cleaver Brooks Model OT-31A Package Boiler, Water Makeup System, S/N: FG-1875
- Cleaver Brooks CB-656-200 Package Boiler, 150 PSI, S/N: L-27026
- Limpsfield LCNP21 Burner, Natural Gas, Air Blower System, w/ Auto Flame, 8.4 Mbtu, S/N: 00767
- Atlas Copco GA-75 Air Compressor, 100 HP, S/N: H0L020439
- Atlas Copco GA-55/125 Air Compressor, 75 HP, 460V, S/N: AiA432479
- Air Receiving Tank
- Cannon pPMC-86 Case Depalletizer w/ Hydraulic Power Pack, S/N: 199
- Stainless Steel Case Palletizer
- SS Case Palletizer
- Orgapack Case Strapper
- Orgapack Case Strapper
- Scissor Lift Platform
- Pallet Racking, 2 Deep, 3 High, 7 Sections, 18ft Tall
- Pallet Racking, 2 Deep, 3 High, 16 Sections, 18ft Tall
- Pallet Racking, 2 Deep, 3 High, 5 Sections, 18ft Tall
- Pallet Racking, 2 Deep, 3 High, 8 Sections, 18ft Tall
- Misc Pallet Racking in Receiving Bay, 2 & 3 Pallet Deep, 14ft-6in Tall, (24) Uprights
- New Electrical Enclosure, Approx 3ft x 4ft x 1 ft Deep
- (3) Freon Evaporators
- 1/2 Gallon Jug Sleever, Model ETIRASTAS, S/N: OTE753
- 1 Gallon Jug Sleever, Model: ETIRASTAS, S/N: OTE752
- (2) Anderson HTST Divert Valves, Controllers
- (2) Anderson HTST Divert Valves, Controllers
- (2) Anderson AJ300 Chart Recorders, (1) Recorder for HTST System
- Flowmeter, Model TZM-50-Body, S/N: 64000B18
- Stainless Steel Platform, Chem Grate, Approx 6ft x 7ft, w/ steps
- Cap Snap Equipment
- Tanker Receiving Bay Platform, Approx 5.5ft x 10ft x 10ft Tall, Dual Hydraulic Safety Cage Lift
- Tanker Spray Ball
- Tanker Spray Ball
- Tanker Spray Ball
- Cap Hoper
- Bossie Cart Loader
- Berendsen Model 7851 Dual Pump Hydraulic Power Pack, Fluid Power, Limited Dual Pump, 600 PSI, S/N: AW32-46
- Grimstad Hydraulic Power Pack, 15 HP
- Carbis Safety Platform
- (8) Barrel Oil Dispensing System w/ Oil Pump
- Coffing 2-Ton Overhead Hoist, Self Driven, Powered Trolley
- Biochemistry 2700 Select Analyzer
- Stainless Steel Lab Refrigerator
- Stainless Steel Lab Hood
- Heraeus Labofuge Model 200 Centrifuge, S/N: 40830401
- Heraeus Labofuge Model 200 Centrifuge, S/N: 40935313
- Heraeus Labofuge Model 200 Centrifuge, S/N: 40461413
- Cole-Palmer Model 77 Slide Warmer, S/N: 209N0002
- Premier Model XH-2004 Slide Warmer, S/N: P-28
- Oakton Con II Series Conductivity Meter, S/N: 255548
- TIF Model VA500 Air Velocity Meter, S/N: 13495
- Accu-Scope Microscope, S/N: 970264
- Accu-Scope 3000 Series Microscope, S/N: 040218
- Cole-Palmer Model 420 Microscope
- Micromaster Model E Microscope
- Charm Laminator-T
- Charm Inctronic 1 Incubator, S/N: 11NC1612T
- Charm Strip Incubator, S/N: SI2530
- Charm Novalum ATP Detection System, S/N: NOVALUM1123
- Charm Rosa Reader, w/ Printer, S/N: RR11675
- Charm Rosa Reader, S/N: RR27805
- Charm Quad Incubator, S/N: Q156L3955
- Charm Quad Incubator, S/N: Q156L6470
- Fischer Scientific Hot Wire Anemometer, S/N: 51175757
- Fischer Scientific Hot Wire Anemometer, S/N: 91218500
- Sper Scientific Sound Meter 840029, S/N: N075578
- Fischer Scientific Shaker/Vibrator, S/N: M391530/01
- Fischer Scientific Shaker/Vibrator, S/N: M384490/12
- Charm Block Heater, S/N: 140618007A
- Taylor Model 103-12 Compact Batch Freezer, S/N: J4014425
- Gaulin EQA Emulsion Quality Analyzer, S/N: 836
- 3M Petrifilm Plate Reader, S/N: 01167/27-04
- Anova Model i100 Immerion Heater Circulator, S/N: 65478
- Poly Science Model 9105 Circulating Bath / Immersion Circulator, S/N: 706402
- Bellingham Stanley Model RFM340 Refractometer, S/N: BT97058
- APC Smart UPS 750, S/N: AS1228315017
- QL Model 10-140 Incubator, S/N: L-00918
- QL Model 10-140 Incubator, S/N: L-15686
- QL Model 12-140 Incubator, S/N: T08064
- Whirlpool Refrigerator
- Poly Science Model T23PA1 Water Bath and Poly Science Model 7306A11B Heater, S/Ns: 1A14A2044, 3E1522573
- Thermo Science Model 2839 Water Bath, S/N: 207030-816
- Thermo Science Model HP8850100 Hot Plate, S/N: C1010027051633212
- Mettler Toledo Multi Parameter PH/ORP/ION/DO/Conductivity Meter, S/N: B220938986
- Mettler Model PE3600 Scale
- Pelouze Heavy Duty Utility Scale, S/N: 1300000709
- Ohaus Model 1P12KS Scale, S/N: 2115325020
- Ishida IB-5000 Scale, S/N: 1010953
- Garver Centrifuge Model 224, S/N: 17433
- Garver Centrifuge Model 224, S/N: 10950
- Biotest Hycon RCS Air Sampler, S/N: 25782
- Orbeco-Hellige Model 942 Ozone Tester, S/N: 4688
- Oxford Bacti-Cinerator III Heater, S/N: K0114618
- Oxford Bacti-Cinerator III Heater, S/N: K0012780
- Benchmark Scientific Model B1000 Sterilizer, S/N: HM-11-13602
- McCormick Bacti-Cinerator IV Heater, S/N: 12072057-2
- Darkfield Quebec Model 3325 Colony Counter
- Rice Lake Model CW80B-3 Scale, 15LB/7.5Kg Capacity, 0.005Lb / 0.005kg, S/N: 97-05375
- MilkoScan FT2 Milk Analyzer
- 3M Pipettor II Model 6503US, S/N: 15009057 (New in Box)
- 3M Pipettor II Model 6502US, S/N: 14015281 (New in Box)
- (2) 3TN pH Digital Testers
- Mettler Toledo pH Tester Probes
- Scale Weights in 2 gram Sets
- Handheld Refractometers – Models N10E and N3E
- Thermolyne Maxi Mixer Model M37615, S/N: 3761213
- RQ Flex 10 Vitamin C Tester, S/N: 10010066 (New)
- RQ Flex 10 Vitamin C Tester, S/N: 1009851
- Fishcher Scientific Model 6050D Incubator, S/N: 111N0457
- (3) Testing Sieves, No 20, 60, 80, Thermometers, Pipettors, Meters
- Monarch Digital RPM Meter
- Dwyer Series 470 Thermal Anemometer, Model 522, MN1064 A 160 1604A
- Hygiena Incubator, S/N: MiniT-1736
- Charm Sciences Incubator
-
Inspections
Open Inspection: Saturday, January 5th – Wednesday, January 9th from 9am – 3pm Daily
-
Removal Notes
ALL items must be removed by February 15, 2019. Any items that are listed as hand carry in the lot description and the buyers would like to hand carry must be completed by Monday, January 14, 2019.
Removal will be BY APPOINTMENT ONLY to be conducted by licensed and insured EXCLUSIVE rigger listed.
Removal will take place during normal business hours Monday-Friday unless otherwise authorized by NMC.
No buyer will be allowed to begin removal prior to payment in full of auction invoice.
If someone other than the registered bidder at an auction sale will be picking up and removing equipment, please complete this form to designate an “Authorized Agent”.
NMC is not responsible for any items damaged during the process of removal.
Rigging/Shipping Notes
No Outside Rigging Companies Will Be Permitted To Work Onsite.
Rigging Prices are posted in the descriptions of each lot and are non-negotiable. Listed rigging fees are for equipment disconnect and simple loading of equipment onto Winning Auction Buyers’ Domestic Trucks/Trailers. For international shipping container loading or special requirements, such as skidding, crating, etc, please contact the rigger directly for a quote.
To schedule your removal appointment, please contact the EXCLUSIVE rigger.
Brooks Rigging
Contact: Larry Brooks
Cell: (970) 227-4283
E-Mail: larry@brooksrigging.comBuyer is responsible for the full cost of rigging and shipment.
*Note: New Mill Capital does not pack, ship, store, crate or rig items. Buyers may either pick up their items at the designated auction site personally or can arrange for a third party logistics firm to manage the removal process for them. If someone other than the registered buyer at the sale is designated to pick up those purchased assets, the buyer must: 1) Contract with an independent logistics firm or other representative who will dismantle, crate, pack, or ship your purchased items. 2) Coordinate the removal of those purchased items to meet the time deadlines indicated on this page. 3) Submit an “Agent Release Authorization” form which will allow New Mill Capital to release items to a third party contractor for shipping, crating or packing purposes. Since New Mill Capital does not ship the items, we do not obtain/prepare any export licenses/documents. *New Mill Capital finds and displays one or more local logistics service providers who understand our removal process, offer specific services, and have certain skills and capacities. We offer this service to you without representations or warranties of any kind whatsoever.
-
Contact Information
New Mill Capital
-
Terms of Sale
Set forth below are the terms and conditions (the “Terms”) that shall apply to every bid or purchase by any party (“Buyer” or “Bidder”) either directly from New Mill Capital Holdings, LLC (“NMC”) as an owner of any item, goods, fixtures or real property, or in a transaction (“Transaction”) in which NMC serves as broker, agent, liquidator or auctioneer for any third party owner. The Terms apply to every transaction, including without limitation, public auctions conducted by NMC or conducted by its partner companies and direct purchases by Buyer of any item either before, after or independent of any public auction.
Terms and Conditions
- All machinery, equipment, merchandise and other items (the “Goods”) are sold on an “AS IS/WHERE IS” basis with no warranties or representations whatsoever, either express or implied. Neither NMC, any client, owner of the Goods, consignor nor anyone acting on their behalf, make any warranties or representations of any kind or nature with respect to the property, its condition, condition suitable for safe operation, particular use, availability or inclusion of applicable programs to operate Goods, or its value, and in no event shall they be responsible for the correctness of description, genuineness, attribution, provenance, title, chain of title, authenticity, authorship and completeness. All Goods are sold on an individual lot basis and not in conjunction with or contingent upon Buyer or Bidder winning or taking delivery of any other lot or Goods unless otherwise agreed to in writing by NMC. No bid at the auction or payment of winning bids shall be in any way continent upon the winning Bidder or Buyer’s outside financing or internal company approval post auction sale. PROSPECTIVE BIDDERS ARE STRONGLY URGED TO CONDUCT THEIR OWN INSPECTION OF THE LOTS THROUGH PRIVATE OR OPEN INSPECTION DATES MADE AVAILABLE TO ALL PROSPECTIVE BIDDERS. No statement (oral or written), including any catalog description or photographs at any auction, or elsewhere shall be deemed such a warranty or representation, or any assumption of responsibility of any kind or nature, whatsoever. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, ANY AND ALL WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY OF GOODS ARE EXPRESSLY DISCLAIMED.
- Registration. Buyers must register as Bidders prior to bidding at any auction sale. All Bidders must provide their name, company (if applicable), mailing address and phone number prior to the auction. Bidders are required to deposit with NMC a valid Visa or MasterCard to secure its obligations hereunder. Electronic Bidders are required to provide a valid email address and Visa or MasterCard number, together with security code. In its sole discretion, NMC may charge Bidders a registration fee or deposit for electronic or onsite bidding and also maintains the right to deny approval of registration of any bidder for any reason it sees fit. Registration fees or required deposits will be clearly displayed during the registration process or communicated directly to Bidders prior to registration approval. For any and all winning bids, the registered party or parties and company’s liability to perform in accordance with the purchase and terms of sale is joint and several.
- Deposits. For onsite bidding, NMC requires a non-refundable deposit of not less than twenty five percent (25%) of the Buyer’s TOTAL PURCHASE PRICE by the end of sale day – with the balance due by the end of the next business day. The non-refundable deposit can be in the form of cash, a cashier’s check, or business check with a bank letter of guarantee or, at NMC’s option, by way of a charge to the credit card referred to in Paragraph 2, above. For Electronic Bidders, at its discretion, NMC may contact Bidders via email or telephone before or during the sale to require a bank letter of guarantee or wire transfer as a deposit. If NMC does not receive a response from its attempts to contact Buyer or if the Buyer does not provide a deposit, NMC reserves the right refuse Buyer’s additional bids with Buyer responsible for all lots or Goods purchased to that point or to cancel Buyer’s bids and re-sell Goods. Online Buyers shall effect payment in full no later than twenty-four (24) hours after receiving an invoice from NMC.
- Invoices & Payment Instructions. Winning Bidders will receive an emailed PDF invoice within 24 hours after the auction sale closed sent to the email address provided during registration. Invoices can be faxed upon request. Detailed payment instructions for each sale are provided on the Winning Bidder’s invoice. PRIOR TO PAYMENT OF ANY INVOICE VIA ELECTRONIC TRANSFER, CALL 888-801-6032 TO VERIFY ACCOUNT INFORMATION AND INSTRUCTIONS.
- Payments. NMC must receive the balance of the total purchase price no later than the close of business on the day following the auction for onsite sales or 48 hours after the last lot of the sale closes for online sales (the “Final Payment Date”). For online winning bidders, NMC sends winning invoices to bidders to the email provided at registration. No other communication from any party including any online bidding platform will be deemed an award of winning bid or invoice. All payments must be in the form of cash deposit, cashier’s or certified check or federal wire transfer of immediately available funds. All of the foregoing must be in form, scope and substance acceptable to NMC in its sole discretion. Credit cards, which are accepted for electronic bidding registration and for payment of deposit will not be accepted for payment of the balance of the total purchase price, however, if Buyer or Bidder is in default of payment, NMC reserves the right to charge the credit card on file for up to the full winning bid, inclusive of buyers premium and sales tax. No title shall pass to Buyer until the total purchase price and all Taxes (defined in Section 6 below) have been paid to NMC in collected funds.
- Taxes. Buyer must also pay to NMC on or before the Final Payment Date, all sales, export, use, delinquent taxes due and penalties thereon, and all other applicable taxes due to any federal, state or local taxing authority (the “Taxes”) as a result of Buyer’s purchase, including without limitation, any taxes arising from any Buyer’s Premium (as defined in Section 7 below). To receive the benefit of any sales tax exemption, Buyer must supply NMC with a state sales tax exemption certificate acceptable in form, scope and substance to NMC in NMC’S sole discretion. If Buyer does not submit evidence of their exemption prior to the close of the auction, Buyer will be charged sales tax, which may be refunded upon Buyer providing documents necessary to prove their qualified exemption within 15 business days from the date of purchase. After 15 business days, Buyer will be required to submit any refund request directly to the state for which the original sales tax was collected and remitted by NMC.
- Buyer’s Premium. NMC in its sole discretion may impose a Buyer’s premium (“Buyer’s Premium”) on any Goods sold. The Buyer’s Premium is a percentage that is added to the final purchase price (hammer price or closing price) of any item. NMC shall charge and collect from each successful Bidder a buyer’s premium for each sale at the auction, in addition to the purchase price as bid. NMC makes the Buyer’s Premium information available in writing electronically or in printed format prior to each auction for each of the Goods identified for auction or sale.
- Removal. (1) Unless otherwise provided in writing by NMC, Buyers or their Agents must remove all Goods purchased before the final removal date and time announced by NMC or emailed to Bidders for online only sales prior to or during the auction (the “Removal Date”). NMC does not warrant that the Removal Date serves as any guarantee that Buyer may be able to take possession of Goods by the removal date. The Removal date is occupancy provided by NMC for Buyers to remove their Goods in accordance with the Terms and Conditions of Sale. NMC may choose to extend the Removal Date at its own discretion due to delay, act of God, government delay, government restrictions, prohibitions, public enemy, allocations or delays imposed by government authority, or other delays for which NMC sees fit for extension of the Removal Date (2) No Goods shall be removed until the full purchase price and all applicable Taxes thereon have been received by NMC in the form required herein. ANY ITEMS NOT REMOVED ON OR BEFORE THE REMOVAL DATE SHALL BE DEEMED ABANDONED AND NMC SHALL HAVE NO FURTHER OBLIGATION TO BUYER WITH RESPECT TO SUCH ITEMS EXCEPT THAT BUYER SHALL NONETHELESS BE OBLIGATED TO PAY THE BALANCE OF THE PURCHASE PRICE INCLUDING ANY BUYER’S PREMIUM AND ANY ADDITIONAL COSTS INCURRED BY NMC. BUYER CONSENTS THAT NMC MAY DISPOSE OF ANY AND ALL ITEMS NOT PAID FOR AND REMOVED BY THE REMOVAL DATE AND MAY RESELL, SCRAP, AND/OR OTHERWISE DISPOSE OF SUCH ITEMS. IN THE EVENT ABANDONED ITEMS OR GOODS BECOME AN INCURRED COST TO NMC TO DISPOSE OF OR ABANDONED ITEMS OR GOODS FURTHER DAMAGE NMC, NMC’S CLIENT, CONSIGNOR OR OWNER OF THE PREMISES WHERE THE GOODS HAVE BEEN ABANDONED, THEN BIDDER SHALL BE RESPONSIBLE FOR THE FULL AMOUNT OF ANY AND ALL DAMAGE OR COST OF SUCH CLAIM, COST OR JUDGEMENT INCLUSIVE OF ATTORNEYS FEES.
- Buyer shall be responsible for the safe and proper removal of any Goods purchased by Buyer and to secure any permitting either individually or through a third party machinery mover, rigger or contractor required to remove Goods if such is required by federal, state or local government agency or entity. Title and risk of loss passes to Buyer upon full payment of invoice. NMC may remove any party or individual from the auction site for theft, attempted theft, unsafe behavior and harassment or unsafe work practices with no guarantee for re-entry to the auction site. NMC does not pack, ship, store, crate or rig items or Goods. In some instances, NMC may collect fees on behalf of a third party service provider. Any cost for rigging, machinery moving, or third party service providers invoiced by or collected by NMC for services, removal or rigging on behalf of any third party, rigger, machinery mover or contractor is done strictly as a convenience to Buyers and is remitted 100% to the party rendering the services. NMC’s invoicing and collection of such fees as a convenience or listing of third party service provider or riggers approved to work at the auction site in no way whatsoever represents any warranty, guarantee or implied liability of NMC related to any third party service provider, rigger, removal party, removal of Goods or endorsement of the listed third party service provider, riggers or exclusive rigger. NMC shall not be liable or responsible for any action or actions of any machinery mover, machinery rigger, contractor, third party transportation company, or for proper or timely delivery of Goods to Buyer. Buyers may either pick up Goods at the designated auction site personally or can contract with a third party agent to manage the removal process for them. Before Goods can be removed by an Agent, Agent must provide NMC with (1) proof of payment in full (Paid In Full Invoice) and (2) an “Agent Release Authorization” form which allows NMC to release items to a third party contractor for shipping, crating or packing purposes. If an exclusive rigger(s) is appointed to the auction, Buyer is urged to contact any third party service provider, the listed riggers or exclusive rigger(s) prior to bidding to determine in Buyer’s sole opinion and discretion that such party is fit to perform the services or removal and loading of Buyer’s Goods and to understand the fees and services to be rendered. When an exclusive rigger is assigned, buyer will abide to the posted fees. No exceptions. Should NMC collects rigging fees on behalf of an exclusive rigger or in the case of seller loading, Buyer accepts that any and all disputes and claims related to rigging and removal of Goods is between Buyer and the exclusive rigger or seller in the case of seller loading.
- Goods that cannot be removed by hand carry from the auction site, or premises, or that require any utility disconnection, or tools to remove Goods, must be removed by a qualified, insured rigger, approved by NMC, including exclusive riggers. Before any removal, Buyer must provide NMC with a certificate of insurance from the rigger, which certificate must be in form, scope and content acceptable to NMC in NMC’S sole discretion. Without limiting NMC’s discretion, such certificate must show that the rigger carries comprehensive liability insurance written by an insurance carrier of national standing, in an amount of not less than two-million dollars ($2,000,000.00) and naming NMC, any landlord, and building owner as an additional insured party. NMC will provide parties required to be listed as additional insured upon inquiry by the rigger or removal company to gain access to auction site for removal. Without limiting the generality of the foregoing, Buyer shall be responsible to restore and repair all real and personal property and fixtures that are altered or damaged as a result of Buyer’s removal of the Goods to a condition substantially similar to the pre-removal condition. NMC shall review the repair and make a determination in its sole discretion, whether the repair is acceptable to NMC. NMC shall have no responsibility to disconnect utilities to the Goods, including but not limited to electric, gas, waste and water lines. Under any circumstance, utility disconnection shall take place at the first junction from the machinery, capped and left in safe condition. Electrical will be locked out, tagged out at the box with all conduit, wire and piping remaining in tact between the first disconnect and the lockout. Utility lines, air lines, etc. shall not be altered other than to be capped and left safe. In any removal of goods, the responsibility and liability of Buyer and Buyer’s rigger, representatives and contractors for any damage or loss due to removal of goods shall be joint and several. Buyer is solely responsible for the proper removal and storage in appropriate containers of all fluids, oils, hazardous chemicals, etc., from machinery purchased. Buyer does hereby indemnify NMC, the owner of the Goods and the owner of the premises in which the Goods are located, from any and all claims, damages, and losses arising from Buyer’s actions or actions with respect to the Goods and Buyer’s presence on the premises in which the Goods are located, including without limitation, injuries to persons or property and environmental violations or contamination. Risk of loss on any Goods shall pass to the Buyer upon payment in full to NMC of all sums due from Buyer in respect to the Goods.
- Small Lot Removal. NMC shall have no responsibility whatsoever for any missing or lost items that can be removed by hand if such items have not been removed within forty-eight (48) hours of the conclusion of the sale. There will be NO removal of any lots until the auction is complete.
- Default. Bidders must bid only on those items they are prepared to pay for and remove in accordance with the terms and conditions of this sale. All items awarded to high Bidders must be paid for by the Final Payment Date and removed by the Final Removal Date unless otherwise stated by NMC in writing. IN THE EVENT BUYER FAILS TO PERFORM CONTRACTUAL OBLIGATIONS (PAYMENT AND REMOVAL). BUYER WILL BE DEEMED TO BE IN DEFAULT AND NMC, AT ITS OPTION, MAY SCRAP, REMARKET OR RESELL THE PROPERTY, IN WHICH EVENT, BUYER WILL BE LIABLE FOR ALL LOSSES INCURRED INCLUDING THE DIFFERENCE BETWEEN BUYER’S WINNING BID PRICE AND THE RESALE PRICE, COSTS OF RESALE AND ANY LOSSES INCURRED BY NMC OR NMC’S CLIENT AS A RESULT OF BUYER’S DEFAULT.
- After Buyer has removed any item from NMC’S possession or within two (2) days of the date of the auction, whichever is sooner, NMC shall have no obligation to make any adjustment or accommodation to Buyer because of any mistake in quantity with respect to such item or items. Buyer must make all requests for adjustments in writing to NMC before any item is removed from the premises where the auction is conducted.
- NMC shall not be responsible for any damages, loss or theft of Goods or delays contemplated in Section 8 of these Terms and Conditions. Without limiting the foregoing, NMC shall not be responsible for damages or losses caused by strikes, civil disorders, acts of nature, government delay or imposed sanctions, machinery movers, riggers or acts of God.
- If for any reason there is a final determination made by NMC that NMC is unable to deliver clear title or ability to remove any Goods purchased by Buyer, NMC’S sole liability shall be to return all sums paid by Buyer to NMC in respect of such Goods. Buyer/Bidder hereby agrees that under all possible circumstances, NMC’s maximum liability in any and all auctions and sales transactions is hereby limited to refunding the purchase price actually paid by the Buyer or Bidder for the applicable sale or auction transaction.
- Minimum or Reserve Prices. NMC, in its sole discretion, reserves the right to establish a reserve or minimum price on any Goods at any time without having to announce, post or publish notice to attendees, bidders and buyers at any auction, whether online or onsite. NMC reserves the right to confirm or reject the final bid. Further, NMC, and/or its employees, officers, owners, affiliates or subsidiaries, may bid at the auction on any Goods at any time either for its own account, benefit or on behalf of a third party or proxy bid.
- Bidders may appoint NMC to be a proxy for the sole purpose of purchasing of bidding when the Bidder CANNOT bid on the day of the sale or does not understand the bidding process. Proxy bids DO NOT include any applicable buyer’s premiums and sales taxes. Proxy Bidders will be notified only if they have been declared the high bid. Notification will take place in the form of an electronic invoice, which will be sent to the email address provided during registration.
- NMC, in its sole discretion, reserves the right to refuse the bid or cancel the lot sale of any person without providing any notice or reason therefore.
- NMC, in its sole discretion, shall control all bidding increments, closing time extensions and advances at any auction. NMC may, in its sole discretion, reject any bid for any reason, settle a dispute amongst bidders as to the high bid or re-open a lot for any reason. No returns or refunds will be permitted, unless authorized by the NMC in writing.
- NMC reserves the right, in its sole discretion, to sell items advertised as a public auction sale, on a piece-by-piece basis or as a complete lot. Without limiting the generality of the foregoing, NMC may accept a complete lot bid and then conduct an item by item auction which auction shall be effective only if the total proceeds therefrom exceed the amount of the complete bid.
- All information provided by NMC to a Buyer, including without limitation, any advertising, lot sales catalogs or otherwise, is subject to deletions, errors, additions, and changes without notice. Although information is gathered from sources thought to be reliable, NMC shall have no responsibility whatsoever for the correctness of any information provided to any attendee or Bidder. Every Bidder hereby agrees to rely solely on the Bidder’s own independent investigation and inspection of any and all Goods.
- The auctioneer may add other terms and conditions of sale, such additional terms and conditions to be announced prior to the auction.
- If NMC is selling or auctioning any Goods on behalf of a third party owner, NMC shall act as an agent only and shall have no liability whatsoever for the acts of any owner/principal of the third party.
- Buyer hereby agrees to comply with all US export and import control and related laws, and acknowledge that NMC is not the exporter or importer of any purchased item. New Mill Capital does not provide customs information, such as HTS codes or certificates of origin, for purchased Goods. It is the sole responsibility of Buyer to provide such information or obtain the information from the original equipment manufacturer (OEM). Certain items offered for sale at the auction may constitute “Restricted Technology.” Under federal law, such items may not be shipped outside the United States. NMC makes no representation or warranty concerning, and has conducted no investigation to ascertain which items, if any, constitute Restricted Technology, or whether any item may have been imported in violation of any U.S. laws or international treaties.
- Each and every Buyer acknowledges that an auction site is a potentially dangerous place, Flammable, noxious, corrosive and pressurized substances may be present. Heavy equipment may be operated and electrical circuits may be live. Every person enters the auction site at his or her own risk with notice of the condition of the auction site or premises and the activities that will be or have been conducted on the premises. No person shall have any claim against NMC, the seller or their respective agents for any injuries sustained or for damages to or loss of property that may occur at or around the auction site.
- If the Buyer fails to comply with any of the Terms and Conditions herein, in addition to the remedies provided for Default, NMC shall have all rights and remedies available to it at law and in equity. Without limiting the generality of the foregoing, NMC may retain all deposits and partial payments received from Buyer and may resell any Goods that Buyer fails to purchase. Buyer shall be responsible for all costs, losses, and damages suffered by NMC (i) as a result of Buyer’s breach of any of the Terms, including without limitation, lost profits and consequential damages, and (ii) incurred in connection with the enforcement of NMC’S rights, including, without limitation, legal fees and costs and expenses related to the resale of Goods, including storage and rigging fees.
- As a prerequisite to asserting any claims against NMC, a Buyer must set forth those claims in writing in sufficient detail to advise as to the particulars of such claim and deliver it by Certified Mail, Return Receipt Requested, to NMC within thirty (30) days of the conclusion of the auction at its address at 50 Louis Street NW, Grand Rapids, MI 49503. Any dispute of any nature whatsoever asserted by a Buyer against NMC shall be instituted within one (1) year of the assertion of its written claim in a state or federal court in San Joaquin County, California, which shall have sole jurisdiction over such dispute. Any claim that NMC may have against the Buyer arising out of its default under the terms of this Agreement, shall similarly be instituted in San Joaquin County of California to which jurisdiction the Buyer irrevocably consents. Costs and attorneys’ fees shall be awarded to the prevailing party. Each Bidder herby waives trial by jury in any action, proceeding or counterclaim brought by any Bidder against NMC on any matter arising out of or in any way connected with these Terms and Conditions, the auction, the Goods or the purchased Goods.