60,000 SqFt Cheese Processing Facility
Online Auction
-
Description
60,000 SqFt Cheese Processing Facility – Assets Formerly of Saputo
Featuring: 45,000 LB Cheese Vats, Starter Room, Finishing Room with (6) 2006 Kusel Jacketed Tables, 210,000 Gal of Silo Capacity, Culturing, Pasteurizing, Processors, RO/Polishing, CIP, Water Filtration, Refrigeration, Air Handling, Rolling Stock, Spare Parts and a Large Amount of Plant Support.
Location address:,
Brochure, Lot Catalog, Equipment List Downloads
There are currently no documents available.
Currency: USD
Sale Start Date: Wednesday, March 18, 2015
Sale Start Time: 10:00am (EST)
Sale End Date: Thursday, March 19, 2015
Sale in conjunction with:
- M. Davis Group, LLC
-
Featured Items
- CHEESE STARTER ROOM
- Walker 800 Gal. Dome-Top S/S Processor, Model PZP, S/N 430, with Stainless Bottom, Bottom Sweep Agitator, Baffle, Dual Sprayball, 100 psi @ 250 Degree F (Processor #4)
- Walker 800 Gal. Dome-Top S/S Processor, Model PZP, S/N 427, with Stainless Bottom, Bottom Sweep Agitator, Baffle, Dual Sprayball, 100 psi @ 250 Degree F (Processor #3)
- APV Aprox. 600 Gal. Dome-Top S/S Processor, S/N B-4377 with Stainless Bottom, Bottom Sweep Agitator, Baffle, Dual Sprayball, 75 psig, Interior Dimensions 4 ft. 2 “ H x 5 ft. 4” W (Processor #2)
- APV Aprox. 600 Gal. Dome-Top S/S Processor, S/N B-4375 with Stainless Bottom, Bottom Sweep Agitator, Baffle, Dual Sprayball, 75 psig, Interior Dimensions 4 ft. 2 “ H x 5 ft. 4” W (Processor #1)
- Aprox. 16 ft. L 2” Clamp Type S/S Shell and Tube Heat Exchanger
- (4) Tri-Clover Centrifugal Pumps – Up to Aprox. 2 hp
- 2012 ESE Integrated Control System Starter Control Panel with Allen Bradley MicroLogix 1500 PLC Controls, Touchpad PanelView 600 Display, ABB Commander 1900 Chart Recorder and Anderson ACR-700 Chart Recorder
- Remaining Installed 2” S/S Piping, (4) G & H Air Valves, Floverter Station, Etc.
- DOUBLE O ROOM
- (4) Damrow 45,000 lb. Double O Jacketed S/S Cheese Vats with Tri-Clover Air Valves
- 2-Tank Rennant System with G & H Positive Displacement Pump with Tri-Clover 1-1/2” Air Valves
- Tri-Clover Centrifugal Pump
- Surrounding S/S Piping and Operator’s Platform with Plastic Grating
- Controls
- CIP System for Double 0 Room including 3-Tank CIP System – (2) Tanks Aprox. 42” W x 48” Deep and (1) Tank Aprox. 42” W x 72” Deep, S/S Shell and Tube Heat Exchanger, WCB and Tri-Clover Air Valves, Centrifugal Pump and S/S Operator’s Platform
- Installed 2” to 3” S/S Piping Throughout Double O Room
- Aprox. (20) Tri-Clover 761 Series S/S Air Valves – Up to 3”
- CHEESE FINISHING ROOM
- (5) 2006 Kusel Jacketed S/S Cheese Vats/Tables, Model DRE437016CRSSPSBS, S/N 0614980, S/N 0614970, S/N 0614960, S/N 0614940 and S/N 0614950 with Verti-Stir Agitation, Unloading Doors, 460 V, 3 Phase, Aprox. Dimensions 43 ft. L x 5 ft. 8” W x 1 ft. 3” Deep
- Cheese Room Vat Process Control System Control Panel with Allen Bradley SLC 5/04 PLC, (2) Touchpad Displays – PanelView 1000 and PanelView 600
- S/S Cheese Unloading System with 14” S/S Auger, Pump and Controls, Mounted on Overhead Trolley System
- Aprox. 10 ft. L x 3 ft. W x 23” Deep S/S COP Tank/Vat with Pump (Utilized for Parts Washing)
- Brine Dipping Tank/Washing System – Aprox. 57 ft. L x 8 ft. 7” W x 6 ft. 7” Deep S/S Clad Mounted in Concrete with (26) 12-Level Aprox. 75” H x 8 ft. W x 24” Deep Racks, Overhead Hoist System, (2) Harrington 2-1/2 Ton Tractor Driven Hoist
- 2012 Aprox. 34” W x 12 ft. L Cheese Block DeWatering Rinse Conveyor System with Water Fall Applicator, All Stainless Frame, Cheese Draining Tank, Tri-Clover Centrifugal Pumps, All Stainless Electric Driven Belt
- Aprox. 127 ft. L x 30” W x 14” Deep All Fiberglass Design Cheese Brine Trough System
- 2-Door Brine Process Control System including (5) Allen Bradley PowerFlex 70 VFD’s from 3 hp, 5 hp and 20 hp
- Skid-Mounted RMC Rotary Cheese Molder with (10) 25-Station Molds, (2) Reclaim S/S Tanks, Centrifugal Pumps, Valves, Fittings, Mitsubishi PLC Controls, Formerly for 6 lb. and 12 lb. Blocks with Hydraulic Pump and Reservoir (Located Near Chemical Handling System)
- Aprox. 24” W x 75” L x 21” Deep S/S COP Jet Spray Wash Trough with Tri-Clover Centrifugal Pump and Temperature Control System
- Aprox. 3” Online Filter System with Tri-Clover 3” Air Valves
- Alfa Laval All S/S Cooling Press, Model M-10-MFMC, S/N 30100-34873 (1990)
- 2004 Alfa Laval All S/S Cooling Press, Model M10-BBASE, S/N 30108-90174
- Aprox. 75” L x 20” W x 17” Deep All S/S Jet Spray Wash/COP Trough with Tri-Clover Centrifugal Pump
- Skid-Mounted UF System with (8) Approx. 4” x 16 ft. L Tubes, CIP Tank with Alfa Laval Pumps, 2011 Koss S/S Shell and Tube Heat Exchanger, Alfa Laval and Other Air Valves, Control System with Allen Bradley 5/04 CPU with PanelView 550 Display
- Aprox. 30 ft. L x 9 ft. W x 5 ft. 4” H All S/S Operator’s Platform with Handrails, Safety Rails, Stairs, Plastic Grating, Eyewash Station, Sink and Strahman Hose Mixing Station
- Aprox. 8 ft. L x 3 ft. W x 64” H Cat Walk with Plastic Grating, Hand Rails, Stairs
- Related Installed 2” to 3” S/S Piping Throughout the Cheese Molding and Vat/Tables Area including Tri-Clover and Sudmo Air Valves, Check Valves, Fittings, Etc.
- REGRIND/REJECT ROOM
- Reitz All S/S Grinder, Model RE-15-K5E328, S/N RE-87002151 with Z-Configuration All S/S Aprox. 10 ft. L x 8 ft. H Inclne Conveyor System with 22” W Belt with Flights — 24” Spacing Between Flights including Rotary Chain Driven Valve Recycling System
- RAW & PASTEURIZED SILOS
- Walker 60,000 Gal. Glycol Jacketed S/S Silo, Model/S/N VSHT-515-R with 144 sq.ft. Jacket, Horizontal Agitator, (2) Tri-Clover Air Valves, Level Sensor, Temperature Sensor, Anderson AJ-300 Chart Recorder, OD 12 ft. 10” Dia. (Tank T1 Raw)
- Mueller Aprox. 50,000 Gal. Glycol Jacketed S/S Silo, Door S/N D-12805-3 with Horizontal Agitator, (2) Tri-Clover Air Valves, Level Sensor, Temperature Gauge, Anderson ACR 700 Chart Recorder, Interior Dimensions Aprox. 65 ft. H x 11 ft. 6” W, OD 11 ft. 6” Dia. (Tank T3 Raw)
- 2007 Mueller 10,000 Gal. Jacketed S/S Silo, Model SVW, S/N 216354-5, Door S/N 216354-6 with Horizontal Agitator, (2) Air Valves, Level Sensor, Temperature Gauge, Anderson ACR 700 Chart Recorder, Interior Dimensions Aprox. 18 ft. 5” H x 9 ft. 9” W, OD 10 ft. 8” Dia., 150 psi @ 100 Degree F, .220 cu.ft., Water/Glycol/Ammonia – R-22, (Tank T5 Raw)
- 2007 Mueller 10,000 Gal. Glycol Jacketed S/S Silo, Model SVW, S/N 216351-3 with Horizontal Agitator, Tri-Clover and Other Air Valves, Level Sensor, Temperature Gauge, Interior Dimensions Aprox. 18 ft. 5” H x 9 ft. 9” W, OD 9 ft. 9” Dia., 150 psi @ 100 Degree F, .220 cu.ft., Water/Glycol/Ammonia – R-22, (Tank T6 Utility)
- Mueller 30,000 Gal. Jacketed S/S Silo, Model SVW, S/N 0177, Door S/N A-141532 with Horizontal Agitator, Tri-Clover and Other Air Valves, Level Sensor, Temperature Gauge, Interior Dimensions Aprox. 39 ft. H x 11 ft. 6” W, OD 12 ft. Dia. (Tank T7 – Condensed Whey)
- Mueller Aprox. 30,000 Gal. Jacketed S/S Silo, S/N 94521-3 with Horizontal Agitator, (2) Air Valves, Level Sensor, Temperature Gauge, 150 psi, Interior Dimensions Aprox. 39 ft. H x 11 ft. 5” W, OD 12 ft. Dia. (Tank T-8 – Condensed Whey)
- Aprox. 5,000 Gal. S/S Horizontal Tank with Painted Front, Dual Sprayball, Level Sensor, No Agitation, Interior Dimensions Aprox. 14 ft. L x 7 ft. 6” W, OD 100” Dia., Jacketed But Not Hooked Up (Older) (Tank T9 – Skim Whey)
- Aprox. 5,000 Gal S/S Horizontal Tank with Painted Front, Dual Sprayball, Level Sensor, No Agitation, Interior Dimensions Aprox. 13 ft. 7” L x 7 ft. 6” W OD 100” Dia., Jacketed But Not Hooked Up (Older) (Tank 10-T Raw Whey)
- APV/Crepaco Aprox. 10,000 Gal. Jacketed S/S Silo, S/N C9494 with Horizontal Agitator, 50 psig, (2) Air Valves, Level Sensor, Anderson ACR-700 Chart Recorder, Interior Dimensions 18 ft. 9” H x 9 ft. 9” W, OD 11 ft. Dia., Glycol (Tank T-11 Past. Cream)
- (5) Fristam Centrifugal Pumps
- (3) Tri-Clover Centrifugal Pumps
- Alfa Laval Positive Displacement Pump, Model SRU1-005/LD with 1-1/2” Clamp Type S/S Head
- Silo Control Panel with Allen Bradley SLC 5/04 PLC Controller with PanelView 1000 Display
- (2) King Gauge Digital Level Sensor Units
- Related Installed 1-1/2” to 3” S/S Piping, Tri-Clover and Other Air Valves, Plug Valves, Flowverter Stations, Flow Meters, Etc.
- HTST #2 – SECONDARY CULTURING ROOM
- 44 GPM Starter HTST System including: Alfa Laval S/S Plate Press, Type CLIP8RH, S/N 30104-93908 with (3) Dividers, Plates, G & H Flow Diversion Valve, 3” Holding Tube, S/S Heat Exchanger, Flow Meter, Fristam Pumps, Balance Tank, Allen Bradley PLC Controls, PanelView 900 Touchpad Display and Anderson Chart Recorder, 110 Degree C, 10-Bar, 145 Degree psi, (1998)
- 1998 Alfa Laval S/S Plate Press, Model M-10-MBASE, S/N 3101-26581 – 8.0 Bar, 51 Volume, 6.0 psi, 230 Degree F, 110 Degree C
- Walker Aprox. 6,000 Gal. Horizontal S/S Tank with Painted Front, Tank Dimensions Aprox. 9 ft. 2” L x 7 ft. W (Older) (Tank T-19 Water)
- 2002 Aprox. 6,000 Gal. Horizontal Jacketed S/S Tank, Model HH1, S/N SPG-32150, Door S/N 32150 with S/S Front, Dual Vertical Sprayball, Air Valve, Level Sensor, Tank Dimensions Aprox. 14 ft. L x 8 ft. 9” W, Ice Water Jacket (Tank T-12 Slurry Tank)
- DairyCraft Aprox. 6,000 Gal. Jacketed Horizontal S/S Tank, S/N 78J3824-2 with Vertical Agitator, Dual Sprayball, Painted Front, Level Sensor, Air Valve, Ice Water Jacket (Tank #13 – Slurry Tank)
- Aprox. 15 ft. L x 8 ft. H Horizontal Jacketed S/S Tank with Vertical Agitator, Painted Front, Set-Up for Dual Vertical Agitator, Sprayball, Air Valve and Level Sensor (Tank #14 – Raw Cream Tank)
- 2002 Walker Aprox. 6,000 Gal. Horizontal Jacketed S/S Tank, Model HHT, S/N SPG-34764, Door S/N 34764 with S/S Front, Level Sensor, Dual Vetical Agitator, (2) Dual Sprayballs, Chart Recorder, Air Valve, Ice Water Jacket, Dimensions 13 ft. L x 8 ft. 8” H (Tank #15 – Past. Secondary Tank)
- 1998 Scherping 6,000 Gal. Jacketed Ice Water S/S Silo, Model ST-96-6000, S/N 87821-1 with Horizontal Agitator, Air Valve, Level Sensor, Temperature Gauge (Tank T-16 – Post Secondary Starter)
- (9) Tri-Clover Centrifugal Pumps – Up to 7-1/2 hp
- (2) G & H Positive Displacement Pumps, Model CHPD-432
- R0/POLISHER/HTST ROOM
- (3) Barrels Assorted S/S Air Valves, Clamps and Fittings
- Aprox. 63” L x 20” W x 17” Deep Jet Spray S/S Wash Trough with Pump
- (6) Assorted Balance Tank – Some Hinged Lid
- 2-Station Horizontal Rotary Finsaver Mounted on S/S Tank
- Aprox. 86” H x 50” W Vertical S/S Tan with Top Lid and Legs
- Fristam 10 hp S/S Clad Centrifugal Pump
- HTST System including 3” Holding Tube, 3” Inline Flow Meter, Alfa Laval 3” Flow Diversion Valve
- Koss Dome-Top Multi-Zone Jacketed S/S Tank with Stainless Bottom, Top Mounted Lightning Type Agitator, Interior Dimensions Aprox. 31” W x 35” Deep
- Crepaco 600 Gal. Dome-Top Jackted S/S Processor, S/N P600-8768 with Vertical Agitator, Stainless Bottom, Bottom Sweep Agitator, Dual Sprayball
- Assorted Pumps in Room including:
Alfa Laval 2 hp Positive Displacement Pump with 2” Clamp Type Head - 5 hp Positive Displacement Pump, Model 2RU2NLS-15-MGEOCD with 2” Clamp Type Head (Possibly G & H)
- (10) Centrifugal Pumps including: (1) Fristam 20 Hp, (1) Fristam 10 hp, (1) Fristam FT40 Aprox. 5 hp, (1) Fristam 3 hp, (1) Alfa Laval 5 hp, (1) Tri-Clover 10 hp, (3) Tri-Clover Aprox 1-1/2 and (1) Tri-Clover ½ hp
- 1998 Enerquip Aprox. 3 ft. L x 6” W S/S Shell and Tube Heat Exchanger
- Separa Tech RO System with (3) 8” Tubes x 17 ft. L and (58) 4” Tubes x 17 ft. L; (4) Shell and Tube Heat Exchangers, (5) Fristam Up to 50 hp Centrifugal Pumps, (2) Additional Skids including CIP System with (3) S/S Tanks, Filters, Tonka Flex Pump and (4) Fristam and Other Centrifugal Pumps, Allen Bradley SLC 5/03 PLC Controls, PanelView 1200 Touchpad Display and Chart Recorder
- CIP ROOM
- 2-Tank Raw CIP System with Aprox. 300 Gal. – 5 ft. H x 38” W Tanks, Fristam 15 hp Liquid Ring Centrifugal Pump, Tri-Clover 20 hp Centrifugal Pump, S/S Shell and Tube Heat Exchanger (Located with Other System), Flow Meter, Allen Bradley PLC Controls with PanelView 900 Display (Controls Integrated)
- 3-Tank Pasteurized CIP System with 1997 Sani-Fab 280 Gal. – 61” H x 36” W Tanks, (3) Fristam and Tri-Clover Centrifugal Pumps, S/S Shell and Tube Heat Exchanger, Flow Meter, Tri-Clover Air Valves, Balance Tank, Catwalk System, Anderson ACR-700 Chart Recorder and Allen Bradley PLC Controls
- APV S/S Plate Press, Type HX, S/N 3531029
- WATER FILTRATION
Mueller Aprox. 40,000 Gal. Insulated S/S Silo, Carbon Steel Exterior, No Agitation (NOTE: Did Not View Interior) - Falco 40,000 Gal. Insulated S/S Silo, S/N 1592 with Horizontal Agitator, S/S Clad Exterior, 304 Stainless (NOTE: Motor or Drive Not Included) (Brine Storage Tank), Appears To Be In Good Shape
- (2) 2012 Trojan UV Logic Systems, Model TrojanUVLogic, S/N TH01208221026 and S/N TH01208221027-01 with Digital Read-Outs
- (4) 2012 Sankmatic S/S Online Filters, S/N 60672-11166, S/N 60672-11165 and (2) S/N’s Not Viewed, 100 psi
- (4) Fristam, Tri-Clover, WCB, and Alfa Laval Up to 10 hp Centrifugal Pumps
- Endress-Hauser 3” PRO-Mass Flow Meter
- 2012 Process Control Panel with Allen Bradley PLC Controls and PanelView Plus 1000 Display (Utilized for Plant Water Supply Pressure and Silo Level
- Aprox. 1000 Gal. Vertical Chemical Poly Tank with Chemical Make-Up System and Pro-Minett Feed System
- RECEIVING BAY
- 2-Bay Tanker Receiving System includes (4) Tanker Sprayballs Mounted on Trolley with Transfer Hoses, Levelers, Fall Limit Preventors, Tri-Clover and APC Air Valves
- Fristam 15 hp Liquid Ring Centrifugal Pump, Model FZX25009707
- Fristam Aprox. 20 hp Centrifugal Pump
- Fristam 5 hp Centrifugal Pump, S/S Clad
- Tri-Clover Aprox. 5 hp Centrifugal Pump
- S/S Balance Tank
- Endress-Hauser 3” Clamp Type S/S Flow Meter
- Related Installed S/S Piping with Valves including Tri-Clover Air Valves and Some Check Valves
- SURPLUS EQUIPMENT
- 1990 Alfa Laval S/S Plate Press, Model 87-FMC, S/N 30101-55240 with (4) Dividers
- Scherping Type Horizontal Rotary Finesaver with SEW Drive
- Safeline S/S Metal Detector with Aprox. 15-1/2” W x 5-3/4” H Product Opening Mounted on 59” L Conveyor
- Breddo Aprox. 200 Gal. Likwifier/Blender, Model LDT, S/N D29561-4-98493 with 25 hp Pancake Style Motor
- AMMONIA COMPRESSORS
- Frick 100 HP Screw Ammonia Compressor, Head Model/S/N XJF120L055055 with Touch-Pad Display and Ram Starter, 480 V (Utilized Just For Glycol Main Use)
- 2008 Frick 100 HP Screw Ammonia Compressor, Head Model/S/N XJS120M0532E, Recently Upgraded Motor and Ram Starter
- 1997 Frick 75 hp Screw Ammonia Compressor, Head Model/S/N XJF120M0156EE with RXF Touch-Pad Display and Ram Starter
- (3) Peerless Circulating Pumps
- Suction Accumulator
- Remaining Auxiliary Ammonia Equipment including: 1997 E.L. Nickell Ammonia Receiver, S/N 47535 and 1971 E.L. Nickell Vertical Receiver
- 2007 Frick/York 2-Fan Evaporative Condenser, Model XLT-XL-495
- AIR SYSTEM
- 2004 Imeco S/S Clad Roof-Mounted Air Handler, Model AA-03-99-DF-EF-RH-Q, S/N 403960100, 460 V, 3 Phase, Heating and Cooling
- Phoenix Roof Mounted Air Handler, Heating and Cooling
- York AcuAir Circulator Air Handling System Mounted on Steel Platform (Utilized for Double O Room)
- Vertical Air Receiver (Located in Walter Filtration Room
- AIR COMPRESSOR SYSTEM
- Kaeser 25 hp Air Compressor, Model AS31, S/N 3111235 with 85,518 Metered Hours
- Kaeser 30 hp Air Compressor, Model AS36, S/N 3613928 with 53,683 Metered Hours
- Ingersoll Rand 25 hp Screw Air Compressor, Model SSR-100-H-HHBB3F, S/N As734U83BW
- Bel Air Comp Air Treatment Fpulair Air Dryer, Model ACT200-2, S/N 2250-F-200-04-08-209, Mounted on Ingersoll Rand Horizontal Tank, 200 SCFM @ Std. Operating Condition
- SPARE PARTS
- (9) Containers of Spare Parts including: Electrical, Fuses, Circuit Breakers, (1) Container of Allen Bradley Only with PLC Racks, I/O Cards, VFD’s, Condulet, Fittings, Drive Parts including: Bearings, Sprockets, Couplers, Pump Parts, Asco Valves, Strahman Parts
- Spare Parts for Most Manufacturing Equipment including: Tetra Alfa 618 Separator Parts, Bearings, Sprockets, S/S Fittings, Plumbing Fittings, Drive Parts, Alf Laval and Fristam Positive Displacement and Centrifugal Pump Parts; Flow Meters; Electrical Wire; V-Belts; Nut and Bolt Hardware Inventory; Filter Supplies
- MAINTENANCE SHOP
- 1999 Shop Task Lathe/Mill, S/N XMTC-990593 with 3-Jaw Chuck; Arcan 40-Ton Hydraulic Press; Double End Grinder, Ridgid Pipe Threader
- GENERAL PLANT
- Mettler Toledo and Rice Lake S/S Digital Scales; Additional COP Tanks, V-Mag S/S Carts; Shell and Tube Heat Exchanger; S/S Tables; Ladders; Electrical Lock-Out Panel; Flammable Storage Cabinets
- MATERIAL HANDLING
- Clark Aprox. 4,775 lb. Capacity 36 V Stand-Up Electric Forklift, Model ESX15, S/N ESX250-0181-9704FL with 188” 3-Stage Lift and Hawker Power Guard HD 36-V Battery Charger
- Crown 3,000 lb. Capacity Stand-Up Electric Forklift, S/N 1A323051 with 270” 2-Stage Lift, Reach, Side-Shift
- Toyota Sit-Down Electric Forklift with 3-Stage Lift
- Spare Forklift Batteries
- Pallet Jacks
- SURPLUS BUILDING
- TrI-Clover Positive Displacement Pump, Model PR25
- Large Assortment of Motor and Drives – New and Used
- Centrifugal and Positive Displacement Pumps – (8) Fristam and (3) Positive Displacement including Sine Positive Displacement Pump including Parts
- Hydraulic Pump with Reservoir
- Harrington 2-1/2-Ton Electric Driven Hoist
- Pancake Style Motor
- Circulating Pump Heads
- S/S Funnel; S/S Plates; Assorted S/S Fittings including Tri-Clover Air Valves
- New Rotary Blower Head
- Gardner Denver Blow Head
- Ramsey Checkweigher (Rough)
- Image 902D Coder
- Electrical Wire
- Pallet Racking
- OUTSIDE
- Aprox. 120,000 lb. 4-Secton Above Ground Truck Scale
- LAB
- Lab Cabinets with Acid Resistant Tops and (2) Single Bowl Sinks
- WASTE TREATMENT
- (3) Aprox. 4,000 Gal. Horizontal S/S Tanks – (1) S/S Front and Recently Painted
- Aerators
- 2-Compartment Concrete Tanks with Agitation and Aeration Equipment
- Kaeser Blower
- Aqua Aerobic Systems Waste Treatment Control System with Siemens Controls
- VWR 1330GD Incubator
- Dessicator Chamber
- Mettler H33AR Balance Scale
- Bio-Science Block Heater
- Gast Vacuum Pump
- Hach Colorimeter, Model DR890
-
Inspections
By Appointment Only
-
Rigging/Shipping Notes
*Note: New Mill Capital does not pack, ship, store, crate or rig items. Buyers may either pick up their items at the designated auction site personally or can arrange for a third party logistics firm to manage the removal process for them. If someone other than the registered buyer at the sale is designated to pick up those purchased assets, the buyer must: 1) Contract with an independent logistics firm or other representative who will dismantle, crate, pack, or ship your purchased items. 2) Coordinate the removal of those purchased items to meet the time deadlines indicated on this page. 3) Submit an “Agent Release Authorization” form which will allow New Mill Capital to release items to a third party contractor for shipping, crating or packing purposes. Since New Mill Capital does not ship the items, we do not obtain/prepare any export licenses/documents. *New Mill Capital finds and displays one or more local logistics service providers who understand our removal process, offer specific services, and have certain skills and capacities. We offer this service to you without representations or warranties of any kind whatsoever.
-
Contact Information
Tracy Martinez
-
TERMS OF SALE
Set forth below are the terms and conditions (the “Terms”) that shall apply to every bid or purchase by any party (“Buyer” or “Bidder”) either directly from New Mill Capital Holdings, LLC (“NMC”) as an owner of any item, goods, fixtures or real property, or in a transaction (“Transaction”) in which NMC serves as broker, agent, liquidator or auctioneer for any third party owner. The Terms apply to every transaction, including without limitation, public auctions conducted by NMC or conducted by its partner companies and direct purchases by Buyer of any item either before, after or independent of any public auction.
TERMS AND CONDITIONS
1. All machinery, equipment, merchandise and other items (the “Goods”) are sold on an “AS IS/WHERE IS” basis with no warranties or representations whatsoever, either express or implied. Neither NMC, any client, owner of the Goods, consignor or anyone acting on their behalf, make any warranties or representations of any kind or nature with respect to the property, its condition, condition suitable for safe operation or its value, and in no event shall they be responsible for the correctness of description, genuineness, attribution, provenance, title, chain of title, authenticity, authorship and completeness. All Goods are sold on an individual lot basis and not in conjunction with or contingent upon Buyer or Bidder winning or taking delivery of any other lot or Goods unless otherwise agreed to in writing by NMC. No bid at the auction or payment of winning bids shall be in any way continent upon the winning Bidder or Buyer’s outside financing or internal company approval post auction sale. PROSPECTIVE BIDDERS ARE STRONGLY URGED TO CONDUCT THEIR OWN INSPECTION OF THE LOTS THROUGH PRIVATE OR OPEN INSPECTION DATES MADE AVAILABLE TO ALL PROSPECTIVE BIDDERS. No statement (oral or written), including any catalog description or photographs at any auction, or elsewhere shall be deemed such a warranty or representation, or any assumption of responsibility of any kind or nature, whatsoever. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, ANY AND ALL WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY OF GOODS ARE EXPRESSLY DISCLAIMED.
2. Registration. Buyers must register as Bidders prior to bidding at any auction sale. All Bidders must provide their name, company (if applicable), mailing address and phone number prior to the auction. Bidders are required to deposit with NMC a valid Visa or MasterCard to secure its obligations hereunder. Electronic Bidders are required to provide a valid email address and Visa or MasterCard number, together with security code. In its sole discretion, NMC may charge Bidders a registration fee or deposit for electronic or onsite bidding and also maintains the right to deny approval of registration of any bidder for any reason it sees fit. Registration fees or required deposits will be clearly displayed during the registration process or communicated directly to Bidders prior to registration approval. For any and all winning bids, the registered party or parties and company’s liability to perform in accordance with the purchase and terms of sale is joint and several.
3. Deposits. For onsite bidding, NMC requires a non-refundable deposit of not less than twenty five percent (25%) of the Buyer’s TOTAL PURCHASE PRICE by the end of sale day – with the balance due by the end of the next business day. The non-refundable deposit can be in the form of cash, a cashier’s check, or business check with a bank letter of guarantee or, at NMC’s option, by way of a charge to the credit card referred to in Paragraph 2, above. For Electronic Bidders, at its discretion, NMC may contact Bidders via email or telephone before or during the sale to require a bank letter of guarantee or wire transfer as a deposit. If NMC does not receive a response from its attempts to contact Buyer or if the Buyer does not provide a deposit, NMC reserves the right refuse Buyer’s additional bids with Buyer responsible for all lots or Goods purchased to that point or to cancel Buyer’s bids and re-sell Goods. Online Buyers shall effect payment in full no later than twenty-four (24) hours after receiving an invoice from NMC.
4. Invoices & Payment Instructions. Winning Bidders can request a printed, paper invoice from the Accounting Manager at the auction or sale location during or after the sale or auction. Electronic Bidders will be sent an electronic invoice to the email address provided during registration. Invoices can be faxed upon request. Detailed payment instructions for each sale are available in the printed auction or sale lot catalog at the sale or auction location on the day of the sale or auction. Electronic Bidders will be sent detailed payment instructions via email along with their invoice.
5. Payments. NMC must receive the balance of the total purchase price no later than the close of business on the day following the auction for onsite sales or 48 hours after the last lot of the sale closes for online sales (the “Final Payment Date”). For online winning bidders, NMC sends winning invoices to bidders to the email provided at registration. No other communication from any party including any online bidding platform will be deemed an award of winning bid or invoice. All payments must be in the form of cash deposit, cashier’s or certified check or federal wire transfer of immediately available funds. All of the foregoing must be in form, scope and substance acceptable to NMC in its sole discretion. Credit cards, which are accepted for electronic bidding registration and for payment of deposit will not be accepted for payment of the balance of the total purchase price, however, if Buyer or Bidder is in default of payment, NMC reserves the right to charge the credit card on file for up to the full winning bid, inclusive of buyers premium and sales tax. No title shall pass to Buyer until the total purchase price and all Taxes (defined in Section 6 below) have been paid to NMC in collected funds.
6. Taxes. Buyer must also pay to NMC on or before the Final Payment Date, all sales, export, use, delinquent taxes due and penalties thereon, and all other applicable taxes due to any federal, state or local taxing authority (the “Taxes”) as a result of Buyer’s purchase, including without limitation, any taxes arising from any Buyer’s Premium (as defined in Section 7 below). To receive the benefit of any sales tax exemption, Buyer must supply NMC with a state sales tax exemption certificate acceptable in form, scope and substance to NMC in NMC’S sole discretion. If Buyer does not submit evidence of their exemption prior to the close of the auction, Buyer will be charged sales tax, which may be refunded upon Buyer providing documents necessary to prove their qualified exemption within 15 business days from the date of purchase. After 15 business days, Buyer will be required to submit any refund request directly to the state for which the original sales tax was collected and remitted by NMC.
7. Buyer’s Premium. NMC in its sole discretion may impose a Buyer’s premium (“Buyer’s Premium”) on any Goods sold. The Buyer’s Premium is a percentage that is added to the final purchase price (hammer price or closing price) of any item. NMC shall charge and collect from each successful Bidder a buyer’s premium for each sale at the auction, in addition to the purchase price as bid. NMC makes the Buyer’s Premium information available in writing electronically or in printed format prior to each auction for each of the Goods identified for auction or sale.
8. Removal. (1) Unless otherwise provided in writing by NMC, Buyers or their Agents must remove all Goods purchased before the final removal date and time announced by NMC or emailed to Bidders for online only sales prior to or during the auction (the “Removal Date”). NMC does not warrant that the Removal Date serves as any guarantee that Buyer may be able to take possession of Goods by the removal date. The Removal date is occupancy provided by NMC for Buyers to remove their Goods in accordance with the Terms and Conditions of Sale. NMC may choose to extend the Removal Date at its own discretion due to delay, act of God, government delay, government restrictions, prohibitions, public enemy, allocations or delays imposed by government authority, or other delays for which NMC sees fit for extension of the Removal Date (2) No Goods shall be removed until the full purchase price and all applicable Taxes thereon have been received by NMC in the form required herein. ANY ITEMS NOT REMOVED ON OR BEFORE THE REMOVAL DATE SHALL BE DEEMED ABANDONED AND NMC SHALL HAVE NO FURTHER OBLIGATION TO BUYER WITH RESPECT TO SUCH ITEMS EXCEPT THAT BUYER SHALL NONETHELESS BE OBLIGATED TO PAY THE BALANCE OF THE PURCHASE PRICE INCLUDING ANY BUYER’S PREMIUM AND ANY ADDITIONAL COSTS INCURRED BY NMC. BUYER CONSENTS THAT NMC MAY DISPOSE OF ANY AND ALL ITEMS NOT PAID FOR AND REMOVED BY THE REMOVAL DATE AND MAY RESELL, SCRAP, AND/OR OTHERWISE DISPOSE OF SUCH ITEMS. IN THE EVENT ABANDONED ITEMS OR GOODS BECOME AN INCURRED COST TO NMC TO DISPOSE OF OR ABANDONED ITEMS OR GOODS FURTHER DAMAGE NMC, NMC’S CLIENT, CONSIGNOR OR OWNER OF THE PREMISES WHERE THE GOODS HAVE BEEN ABANDONED, THEN BIDDER SHALL BE RESPONSIBLE FOR THE FULL AMOUNT OF ANY AND ALL DAMAGE OR COST OF SUCH CLAIM, COST OR JUDGEMENT INCLUSIVE OF ATTORNEYS FEES.
9. Buyer shall be responsible for the safe and proper removal of any Goods purchased by Buyer and to secure any permitting either individually or through a third party machinery mover, rigger or contractor required to remove Goods if such is required by federal, state or local government agency or entity. Title and risk of loss passes to Buyer upon full payment of invoice. NMC may remove any party or individual from the auction site for theft, attempted theft, unsafe behavior and harassment or unsafe work practices with no guarantee for re-entry to the auction site. NMC does not pack, ship, store, crate or rig items or Goods. In some instances, NMC may collect fees on behalf of a third party service provider. Any cost for rigging, machinery moving, or third party service providers invoiced by or collected by NMC for services, removal or rigging on behalf of any third party, rigger, machinery mover or contractor is done strictly as a convenience to Buyers and is remitted 100% to the party rendering the services. NMC’s invoicing and collection of such fees as a convenience or listing of third party service provider or riggers approved to work at the auction site in no way whatsoever represents any warranty, guarantee or implied liability of NMC related to any third party service provider, rigger, removal party, removal of Goods or endorsement of the listed third party service provider, riggers or exclusive rigger. NMC shall not be liable or responsible for any action or actions of any machinery mover, machinery rigger, contractor, third party transportation company, or for proper or timely delivery of Goods to Buyer. Buyers may either pick up Goods at the designated auction site personally or can contract with a third party agent to manage the removal process for them. Before Goods can be removed by an Agent, Agent must provide NMC with (1) proof of payment in full (Paid In Full Invoice) and (2) an “Agent Release Authorization” form which allows NMC to release items to a third party contractor for shipping, crating or packing purposes. If an exclusive rigger(s) is appointed to the auction, Buyer is urged to contact any third party service provider, the listed riggers or exclusive rigger(s) prior to bidding to determine in Buyer’s sole opinion and discretion that such party is fit to perform the services or removal and loading of Buyer’s Goods and to understand the fees and services to be rendered. When an exclusive rigger is assigned, buyer will abide to the posted fees. No exceptions.
10. Goods that cannot be removed by hand carry from the auction site, or premises, or that requires any utility disconnection, or tools to remove Goods, must be removed by a qualified, insured rigger, approved by NMC. Before any removal, Buyer must provide NMC with a certificate of insurance from the rigger, which certificate must be in form, scope and content acceptable to NMC in NMC’S sole discretion. Without limiting NMC’s discretion, such certificate must show that the rigger carries comprehensive liability insurance written by an insurance carrier of national standing, in an amount of not less than two-million dollars ($2,000,000.00) and naming NMC, any landlord, and building owner as an additional insured party. NMC will provide parties required to be listed as additional insured upon inquiry by the rigger or removal company to gain access to auction site for removal. Without limiting the generality of the foregoing, Buyer shall be responsible to restore and repair all real and personal property and fixtures that are altered or damaged as a result of Buyer’s removal of the Goods to a condition substantially similar to the pre-removal condition. NMC shall review the repair and make a determination in its sole discretion, whether the repair is acceptable to NMC. NMC shall have no responsibility to disconnect utilities to the Goods, including but not limited to electric, gas, waste and water lines. Under any circumstance, utility disconnection shall take place at the first junction from the machinery, capped and left in safe condition. Electrical will be locked out, tagged out at the box with all conduit, wire and piping remaining in tact between the first disconnect and the lockout. Utility lines, air lines, etc. shall not be altered other than to be capped and left safe. In any removal of goods, the responsibility and liability of Buyer and Buyer’s rigger, representatives and contractors for any damage or loss due to removal of goods shall be joint and several. Buyer is solely responsible for the proper removal and storage in appropriate containers of all fluids, oils, hazardous chemicals, etc., from machinery purchased. Buyer does hereby indemnify NMC, the owner of the Goods and the owner of the premises in which the Goods are located, from any and all claims, damages, and losses arising from Buyer’s actions or actions with respect to the Goods and Buyer’s presence on the premises in which the Goods are located, including without limitation, injuries to persons or property and environmental violations or contamination. Risk of loss on any Goods shall pass to the Buyer upon payment in full to NMC of all sums due from Buyer in respect to the Goods.
11. Small Lot Removal. NMC shall have no responsibility whatsoever for any missing or lost items that can be removed by hand if such items have not been removed within forty-eight (48) hours of the conclusion of the sale. There will be NO removal of any lots until the auction is complete.
12. Default. Bidders must bid only on those items they are prepared to pay for and remove in accordance with the terms and conditions of this sale. All items awarded to high Bidders must be paid for by the Final Payment Date and removed by the Final Removal Date unless otherwise stated by NMC in writing. IN THE EVENT BUYER FAILS TO PERFORM CONTRACTUAL OBLIGATIONS (PAYMENT AND REMOVAL). BUYER WILL BE DEEMED TO BE IN DEFAULT AND NMC, AT ITS OPTION, MAY SCRAP, REMARKET OR RESELL THE PROPERTY, IN WHICH EVENT, BUYER WILL BE LIABLE FOR ALL LOSSES INCURRED INCLUDING THE DIFFERENCE BETWEEN BUYER’S WINNING BID PRICE AND THE RESALE PRICE, COSTS OF RESALE AND ANY LOSSES INCURRED BY NMC OR NMC’S CLIENT AS A RESULT OF BUYER’S DEFAULT.
13. After Buyer has removed any item from NMC’S possession or within two (2) days of the date of the auction, whichever is sooner, NMC shall have no obligation to make any adjustment or accommodation to Buyer because of any mistake in quantity with respect to such item or items. Buyer must make all requests for adjustments in writing to NMC before any item is removed from the premises where the auction is conducted.
14. NMC shall not be responsible for any damages, loss or theft of Goods or delays contemplated in Section 8 of these Terms and Conditions. Without limiting the foregoing, NMC shall not be responsible for damages or losses caused by strikes, civil disorders, acts of nature, government delay or imposed sanctions, machinery movers, riggers or acts of God.
15. If for any reason there is a final determination made by NMC that NMC is unable to deliver clear title or ability to remove any Goods purchased by Buyer, NMC’S sole liability shall be to return all sums paid by Buyer to NMC in respect of such Goods. Buyer/Bidder hereby agrees that under all possible circumstances, NMC’s maximum liability in any and all auctions and sales transactions is hereby limited to refunding the purchase price actually paid by the Buyer or Bidder for the applicable sale or auction transaction.
16. Minimum or Reserve Prices. NMC, in its sole discretion, reserves the right to establish a reserve or minimum price on any Goods without having to announce, post or publish notice to attendees and buyers at any auction. NMC reserves the right to confirm or reject the final bid. Further, NMC, and/or its affiliates or subsidiaries, may bid at the auction either for its own account or on behalf of a third party.
17. Absentee Bids. By completing an “Absentee (Proxy) Bidder Form,” Bidders may appoint NMC to be an agent and proxy for the sole purpose of purchasing the items listed when the Bidder CANNOT bid on the day of the sale. ALL BIDS ARE FINAL AND BINDING and DO NOT include any applicable buyer’s premiums and sales taxes. NMC will bid up to the specified maximum bid amount to win the item, using only the amount needed to win the item. NMC has complete discretion whether and when to accept Proxy bids. The auctioneer’s announcements at the time the lot is sold take precedence on any and all published materials. Proxy Bidders will be notified only if they have been declared the high bid. Notification will take place in the form of an electronic invoice, which will be sent to the email address provided during registration.
18. NMC, in its sole discretion, reserves the right to refuse the bid or cancel the lot sale of any person without providing any notice or reason therefore.
19. NMC, in its sole discretion, shall control all bidding increments, closing time extensions and advances at any auction. NMC reserves the right to reject any bid that is only a minimal increase over the preceding bid, that is not commensurate with the value of the item being offered or that NMC believes was made illegally or in bad faith. In the event of a dispute among Bidders, or tie bid, NMC may, in its sole discretion, either accept what it deems to be the final bid or re-open the lot to solicit further bids on the item in dispute. No returns or refunds will be permitted, unless authorized by the NMC in writing.
20. NMC reserves the right, in its sole discretion, to sell items advertised as a public auction sale, on a piece-by-piece basis or as a complete lot. Without limiting the generality of the foregoing, NMC may accept a complete lot bid and then conduct an item by item auction which auction shall be effective only if the total proceeds therefrom exceed the amount of the complete bid.
21. All information provided by NMC to a Buyer, including without limitation, any advertising, lot sales catalogs or otherwise, is subject to deletions, errors, additions, and changes without notice. Although information is gathered from sources thought to be reliable, NMC shall have no responsibility whatsoever for the correctness of any information provided to any attendee or Bidder. Every Bidder hereby agrees to rely solely on the Bidder’s own independent investigation and inspection of any and all Goods.
22. The auctioneer may add other terms and conditions of sale, such additional terms and conditions to be announced prior to the auction.
23. If NMC is selling or auctioning any Goods on behalf of a third party owner, NMC shall act as an agent only and shall have no liability whatsoever for the acts of any owner/principal of the third party.
24. Buyer hereby agrees to comply with all US export and import control and related laws, and acknowledge that NMC is not the exporter or importer of any purchased item. Certain items offered for sale at the auction may constitute “Restricted Technology.” Under federal law, such items may not be shipped outside the United States. NMC makes no representation or warranty concerning, and has conducted no investigation to ascertain which items, if any, constitute Restricted Technology, or whether any item may have been imported in violation of any U.S. laws or international treaties.
25. Each and every Buyer acknowledges that an auction site is a potentially dangerous place, Flammable, noxious, corrosive and pressurized substances may be present. Heavy equipment may be operated and electrical circuits may be live. Every person enters the auction site at his or her own risk with notice of the condition of the auction site or premises and the activities that will be or have been conducted on the premises. No person shall have any claim against NMC, the seller or their respective agents for any injuries sustained or for damages to or loss of property that may occur at or around the auction site.
26. If the Buyer fails to comply with any of the Terms and Conditions herein, in addition to the remedies provided for Default, NMC shall have all rights and remedies available to it at law and in equity. Without limiting the generality of the foregoing, NMC may retain all deposits and partial payments received from Buyer and may resell any Goods that Buyer fails to purchase. Buyer shall be responsible for all costs, losses, and damages suffered by NMC (i) as a result of Buyer’s breach of any of the Terms, including without limitation, lost profits and consequential damages, and (ii) incurred in connection with the enforcement of NMC’S rights, including, without limitation, legal fees and costs and expenses related to the resale of Goods, including storage and rigging fees.
27. As a prerequisite to asserting any claims against NMC, a Buyer must set forth those claims in writing in sufficient detail to advise as to the particulars of such claim and deliver it by Certified Mail, Return Receipt Requested, to NMC within thirty (30) days of the conclusion of the auction at its address at 23480 Park Sorrento, Suite 104B, Calabasas, CA 91302. Any dispute of any nature whatsoever asserted by a Buyer against NMC shall be instituted within one (1) year of the assertion of its written claim in a state or federal court in San Joaquin County, California, which shall have sole jurisdiction over such dispute. Any claim that NMC may have against the Buyer arising out of its default under the terms of this Agreement, shall similarly be instituted in San Joaquin County of California to which jurisdiction the Buyer irrevocably consents. Costs and attorneys’ fees shall be awarded to the prevailing party. Each Bidder herby waives trial by jury in any action, proceeding or counterclaim brought by any Bidder against NMC on any matter arising out of or in any way connected with these Terms and Conditions, the auction, the Goods or the purchased Goods.